EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is really a very economical solar controller made for off-grid solar programs. Based on multiphase synchronous rectification technological innovation, it makes certain optimized energy conversion and program balance for a variety of photovoltaic (PV) purposes.
Important Options in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic Electricity harvesting. Critical capabilities contain:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Show with actual-time info monitoring.
Several Load Handle Modes which includes guide and timer.
Extensive Electronic Protections towards overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Step Guide to Starting the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Make sure all elements are incorporated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the model number and voltage ratings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry site close to the battery financial institution.
Safe the Tracer AN controller using the supplied mounting brackets.
Manage right clearance for warmth dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always follow proper protection protocols and make sure the program is powered off before connecting parts.
Move 1: Join the battery terminals on the cost controller Click Here (positive to favourable, negative to destructive).
Action two: Hook up the photo voltaic panel array towards the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Phase four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Power over the controller by connecting the battery 1st.
Use the LCD Show to navigate the options menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Handle.
five. Checking and Information Logging
The Tracer AN Collection supports true-time monitoring utilizing the MT50 remote meter.
Details might be logged through the RS485 interaction port using software package including Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Difficulty 1: No Ability Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Validate the solar array’s voltage rating.
Modify system parameters if vital.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification know-how assures:
Higher Efficiency: Decreased Vitality losses during conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Extended Battery Life: Steady and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned setup guidebook, people can ensure highest performance and method longevity.